Pulp treatment
Pulp Buffer Tank and Transfer Assembly
Connected process vessels and transfer equipment collect fruit pulp before the next selected duty.
View machineVacuum Deaerator for Fruit Pulp
A vertical vacuum vessel presents a suitable pulp stream under reduced pressure so released gas can leave through the vacuum system.
An optional air-removal duty
Construction & selection
- Principal assembly
- Vertical vacuum vessel
- Visible details
- Viewing points, product pipes and transfer equipment
- Selection factors
- Feed temperature, foaming, viscosity and distribution
Include deaeration when the product assessment calls for it. The required vacuum system, any cooling/condensate handling and aroma considerations follow the actual pulp; no common residual-oxygen result is assumed.
At the inlet
Pumpable pulp whose foaming, temperature and viscosity fit the selected distribution arrangement.
At the outlet
Deaerated pulp for onward processing, plus a separate vacuum-side gas and condensate duty.
How the machine works
The inlet distribution exposes product within the reduced-pressure vessel. Released gas travels toward the vacuum equipment, while liquid collects for controlled discharge. Feed, liquid level and the outlet pump have to stay coordinated to maintain that separation.
Connect the surrounding equipment
Provide a stable feed and keep vacuum and product outlets distinct. Match discharge to the next process without upsetting vessel level or pump suction. Deaeration is not the thermal treatment step and does not prescribe its operating conditions.
Maintenance & cleaning access
Inspect the distribution parts, observation points and vacuum seals for residue or leakage. Clean and drain the wetted circuit and maintain access to the vacuum and product pumps. Confirm the connected cleaning route for the offered assembly.
Where it belongs
Related production lines
Fresh Mango to Fruit Pulp Line
Whole mangoes under an agreed cultivar, maturity and receiving condition.
Prepared Pulp Treatment and Aseptic Packing
Prepared fruit flesh or pumpable pulp with its particle profile, temperature and previous processing state defined.
Connected machinery
Before and after this machine
Pulp treatment
Tube-in-Tube Pulp Thermal System
A tube-in-tube thermal family brings a suitable fruit pulp through a specified heating, holding and cooling route.
View machine
Cleaning and changeover
Three-tank CIP Cleaning System
The shown three-tank cleaning station combines liquid storage, circulation pumps, a valve manifold and operator interface for selected closed circuits.
View machineA machine. A line. A defined requirement.
Request a quotation Start with what you want to produce.
Tell us about the equipment or product you have in mind.