Fruit handling
Manual Inspection and Preparation Conveyor
An accessible conveyor work area supports manual inspection and preparation of mangoes before machine processing.
View machineMango Destoner and Flesh Recovery Machine
A mango preparation family combines controlled feeding and separation duties to recover flesh ahead of downstream screening.
See the companion equipment view
Separate the hard stone from useful flesh
Construction & selection
- Published family
- MQ5 / MQ10 / MQ20
- Feed basis
- Mango processing input in t/h
- Selection conditions
- Cultivar, maturity, stone geometry and peel boundary
Keep mango flesh recovery distinct from guava seed removal or papaya cavity-seed preparation. The stone shape, attachment and incoming maturity affect the selected tooling and the recovered flesh.
At the inlet
Mangoes within the selected cultivar, ripeness and preparation conditions.
At the outlet
Recovered flesh for the pulper and separate stone/peel fractions according to the fitted configuration.
How the machine works
Mangoes enter the upper feed arrangement and meet the separation sections. The wanted flesh is collected for onward processing while the hard stone and unwanted fractions leave their designated paths. The downstream pulper then works on the recovered material rather than being asked to break hard stones.
| Family model | Reference input, t/h | Listed power, kW |
|---|---|---|
| MQ5 | 5 | 7.5 |
| MQ10 | 10 | 11 |
| MQ20 | 20 | 15 |
These published series values describe mango-processing input, not finished-pulp output. The illustrated assembly has no confirmed submodel; a fruit trial and the offered configuration establish the usable duty.
Connect the surrounding equipment
The feed hopper needs stable presentation from inspection or an appropriate elevator. Provide separate collection under the product and reject outlets. Space for opening, tool access and drive service belongs beside the assembly, not inside another conveyor footprint.
Maintenance & cleaning access
Following isolation, inspect the working sections and reject passages for retained stones, skin and flesh. Check contact parts for wear, clean both product and waste paths and reassemble to the machine-specific settings. Do not infer a common clean-in-place cycle for enclosed tooling.
Where it belongs
Related production lines
Fresh Mango to Fruit Pulp Line
Whole mangoes under an agreed cultivar, maturity and receiving condition.
Connected machinery
Before and after this machine
Fruit handling
Inclined Fruit Elevator
A flighted inclined belt transfers suitable fruit from a lower receiving or washing point to a higher process inlet.
View machine
Pulp recovery and texture
Two-stage Fruit Pulper and Refiner
Two driven cylindrical stages recover pulp from suitable prepared fruit and refine the accepted fraction to the selected screen arrangement.
View machineA machine. A line. A defined requirement.
Request a quotation Start with what you want to produce.
Tell us about the equipment or product you have in mind.