Pulp treatment
Pulp Buffer Tank and Transfer Assembly
Connected process vessels and transfer equipment collect fruit pulp before the next selected duty.
View machineTube-in-Tube Pulp Thermal System
A tube-in-tube thermal family brings a suitable fruit pulp through a specified heating, holding and cooling route.
Straight product passages for the selected pulp duty
Construction & selection
- Construction shown
- Straight tube passes, connected vessels, valves and controls
- Heating choices
- Hot-water or steam service by configuration
- Cooling choices
- Cooling-water or chilled-water service by configuration
- Process conditions
- Selected for the product, flow and required preservation route
Agree the thermal process separately from mechanical equipment selection. Fibre, particles and fouling behavior affect the product passage and cleaning design. Optional upstream deaeration does not make every pulp compatible with one unchanged thermal skid.
At the inlet
A defined pumpable pulp stream with known particles, fibres, viscosity and inlet temperature.
At the outlet
Treated pulp at the condition required by the selected downstream transfer or bag-filling system.
How the machine works
Product passes through the selected tubular circuit while the heating and cooling media exchange energy across the tube walls. Holding provision and flow establish the intended process residence. The actual product passage, pump and valve arrangement are selected together to handle the pulp without relying on a generic exchanger label.
| Catalogue family reference | Published configuration range |
|---|---|
| Temperature envelope | 72–150 °C |
| Holding-time envelope | 15–120 s |
These catalogue ranges describe selectable tube-in-tube family configurations. They are not simultaneous operating targets, a rating for the pictured assembly, a validated pulp recipe or a shelf-life statement.
Connect the surrounding equipment
Coordinate feed stability, heating/cooling availability and the receiving filler state. Label product, recovery/diversion and cleaning routes. Interruptions need an agreed product disposition so a downstream wait does not become an unplanned holding condition.
Maintenance & cleaning access
Clean the complete product circuit, including holding and connecting pipework. Inspect seals and exchanger fouling and maintain the relevant instruments. Calibration, process validation and cleaning validation answer different questions and need their own records.
Where it belongs
Related production lines
Fresh Mango to Fruit Pulp Line
Whole mangoes under an agreed cultivar, maturity and receiving condition.
Prepared Pulp Treatment and Aseptic Packing
Prepared fruit flesh or pumpable pulp with its particle profile, temperature and previous processing state defined.
Connected machinery
Before and after this machine
Pulp treatment
Vacuum Deaerator for Fruit Pulp
A vertical vacuum vessel presents a suitable pulp stream under reduced pressure so released gas can leave through the vacuum system.
View machine
Bulk packing
Aseptic Bag Filler for Fruit Pulp
A bag-filling assembly with two positions and drum-handling lanes connects treated pulp to its selected bulk package.
View machine
Cleaning and changeover
Three-tank CIP Cleaning System
The shown three-tank cleaning station combines liquid storage, circulation pumps, a valve manifold and operator interface for selected closed circuits.
View machineA machine. A line. A defined requirement.
Request a quotation Start with what you want to produce.
Tell us about the equipment or product you have in mind.