Flesh recovery
Mango Destoner and Flesh Recovery Machine
A mango preparation family combines controlled feeding and separation duties to recover flesh ahead of downstream screening.
View machineResidue & waste interfaces configuration
Give stones, seeds, peel and wastewater their own exit paths.
Configuration guidance for the material or process interface. Related machine pages below describe the physical equipment.
Preparation or interface boundary
Separated material from receiving, preparation, extraction and finishing plus identified wash / cleaning discharges. Keep these streams distinct until their handling is defined.
Outgoing product and fractions
Collected, identifiable streams at an agreed plant hand-off. No by-product market, wastewater compliance or disposal outcome is implied by the equipment list.
Connection decisions
Map container capacity basis, removal route, transfer height, access, drainage and responsibility beyond the line. Keep product and residue movement from competing for the same work area.
Control questions
Ask how full containers, blocked discharge and interrupted removal are recognized. Define the response before waste backs up into a product-contact operation.
Cleaning and access
Review access around chutes, conveyors and containers and how accumulated fruit is removed. The residue route is part of the hygiene and changeover review.
Evidence for the selected configuration
Use observed campaign mass and actual residue properties to review handling. Request the boundary drawing and identify any environmental or disposal review owned by the site.
From guidance to machinery
Equipment for this review
Pulp recovery and texture
Two-stage Fruit Pulper and Refiner
Two driven cylindrical stages recover pulp from suitable prepared fruit and refine the accepted fraction to the selected screen arrangement.
View machine
Cleaning and changeover
Three-tank CIP Cleaning System
The shown three-tank cleaning station combines liquid storage, circulation pumps, a valve manifold and operator interface for selected closed circuits.
View machineA machine. A line. A defined requirement.
Request a quotation Start with what you want to produce.
Tell us about the equipment or product you have in mind.